Regviz

Espressif Systems /ESP32 /UART0 /MEM_CONF

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as MEM_CONF

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Espressif Systems/ESP32/UART0/MEM_CONF#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (MEM_PD)MEM_PD 0RX_SIZE0TX_SIZE0RX_FLOW_THRHD_H3 0RX_TOUT_THRHD_H3 0XON_THRESHOLD_H2 0XOFF_THRESHOLD_H2 0RX_MEM_FULL_THRHD 0TX_MEM_EMPTY_THRHD

Fields

MEM_PD

Set this bit to power down mem.when reg_mem_pd registers in the 3 uarts are all set to 1 mem will enter low power mode.
RX_SIZE

This register is used to configure the amount of mem allocated to receiver’s fifo. the default byte num is 128.
TX_SIZE

This register is used to configure the amount of mem allocated to transmitter’s fifo.the default byte num is 128.
RX_FLOW_THRHD_H3

refer to the rx_flow_thrhd’s describtion.
RX_TOUT_THRHD_H3

refer to the rx_tout_thrhd’s describtion.
XON_THRESHOLD_H2

refer to the uart_xon_threshold’s describtion.
XOFF_THRESHOLD_H2

refer to the uart_xoff_threshold’s describtion.
RX_MEM_FULL_THRHD

refer to the rxfifo_full_thrhd’s describtion.
TX_MEM_EMPTY_THRHD

refer to txfifo_empty_thrhd 's describtion.

Links

()

Register License

Copyright 2024 Espressif Systems (Shanghai) PTE LTD

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data